Best Mics For Camcorders To Record Clear Audio

If you have planned to start your filmmaking or video-making project, you’ll need the best mics for camcorders for recording audio.

Of course, your DSLR's have a built-in microphone. Those microphones are tiny devices, and, in most cases, it is similar to the microphones built into your phone. Never underestimate the small size of microphones, even using a headset microphone you can simply record audio. 

But to get best audio quality while recording audios, you need best mics for camcorders. To make the task more comfortable for you, I have compiled a list of top ten mics for camcorders available in the market currently.

Don't miss out our expert's recommendations on low light professional video camera if you are record perfect high quality videos without much effort.





  • Delivers clear, crisp, directional audio.
  • tight pickup area that focuses directly in front of the mic.
  • Reduces other surrounding sounds.
  • integrated rycote lyre shock mount.
  • The X-Y pattern capturing a true representation of the sonic atmosphere.
  • handles high sound pressures up to 120 dB SPL.
  • on-board low-cut filter cut out low-frequency noise.
  • Broadcast sound quality.
  • Low noise circuitry.
  • Internal rechargeable lithium battery.
  • supplying over 150 hours operation.
  • compatible with Handy Recorders.
  • reduction of wind noise.
  • ensures mono compatibility.
  • Acoustically matched true condenser capsules.
  • Rycote Lyre onboard shock mounting.
  • Balanced professional XLR output.



RODE VIDEO MIC - mics for camcorders

Are you looking for compact and light-weight mics for camcorders? Then look no further this mic is light-weight and comes with an integrated Rycote shockmount. The Rycote shock mount isolates your microphone from vibrations and bumps that could otherwise interfere with your sound.

Being lightweight by design, this is one of the best mics for camcorders that delivers crisp, clear, directional audio with excellent ease for use. Its tight pickup area focuses the mic and minimizes other surrounding sounds. It ensures that your subject is isolated from distracting background noise.

It is constructed from a single piece of hard-wearing thermoplastic. This provides better acoustic suspension compared to traditional elastic solutions, ensuring that it will never wear out, sag or snap.

This one is easy to fit in, which means it don't require any kind of complicated switches or settings. Also, no batteries are needed to operate, and thus it ensures you never miss a great shot. Also if you are using this one in outdoor you can buy a dead cat to record sound under windy outdoor conditions.


  • Delivers clear, directional, and crisp audio.
  • Tight pickup area for focusing directly in front of the mic.
  • Integrated Rycote Lyre shock mount isolates the mic from bumps and vibrations.
  • High-quality directional microphone.
  • Rugged reinforced ABS construction with included Windshield.
  • Integrated cold-shoe mount with 3/8-inch thread.
  • Line gradient acoustic principle.
  • Frequency range: 100Hz-16kHz.
  • Maximum SPL: 120dBSPL.
  • Sensitivity: -35.0dB.
  • Equivalent noise level: 34dBA.
  • Weight: 73.00g.
  • Dimensions: 79.00x 73.00 x 167.00 mm.


  • Lightweight.
  • Produces crisp, clear audio.
  • Robust design that prevents camera rattling.


  • Noise cancellation is not as good as expected.



Tascam TM-2X is a directional condenser microphone in an X-Y configuration. Its X-Y pattern and two mic capsules are ideal for capturing an exact representation of the audio and it is best mics for advanced camcorders.

This microphone is designed with the capacity to handle high sound pressures of up to 120 dB SPL. The two-stage output level adjustment switch ensures compatibility with a variety of cameras.

Its vari-angle structure allows up to 180-degree rotation for optimal mic placement. The included shoe-adapter can be attached to the camera accessory shoe. Its tripod mounting threads allow the unit to be connected to a camera tripod.

The mic can achieve a high-frequency response of 50Hz to 20kHz. The setup is incredibly simple to use. It features an onboard low-cut filter to cut out the low-frequency background noise. Depending upon the video recording scenario, you can choose to turn this feature on or off.

No more worrying about the unwanted noise being heard in mic. A floating support structure under the mic easily absorbs the unwanted noise. Also it has a noise isolation arm that reduces the lens operating noise. You can cover the mic with a windscreen which helps in reducing the wind noise.


  • The X-Y pattern and two mic capsules capture an accurate representation of the sonic atmosphere.
  • It can easily handle pressures up to 120dB SPL.
  • Two-stage output level adjustment switch for ensuring camera compatibility.
  • Simple setup as it connects TM-2X with the camera’s mic input jack and gives high-quality audio & video.
  • Includes shoe adapter for attaching camera accessory shoe.
  • The tripod mounting threads enables camera tripod attachment.
  • The floating support structure absorbs unwanted handling and mechanical noise.
  • Wind noise can be reduced easily by the included windscreen.
  • Designed with the capacity for handling high sound pressures up to 120 decibels.
  • 180º rotation is possible by the VARI-angle microphone structure for optimal mic placement.
  • Frequency range: 50Hz-20kHz.
  • Output impedance: 1.6k ohms.
  • S/N Ratio: 74dB.
  • Cable Length: 33cm.


  • Excellent design and look.
  • A helpful accessory for interviews.
  • It can be powered through a plug.
  • Mic sensitivity switch is very useful.
  • The floating structure helps to cut out any vibration feedback.


  • Has a cheap plastic mount.


The NTG4+ exhibits superior audio quality with a warm, rich quality and a wide frequency response and it is a reliable one in the list of mics of camcorders. Its RF bias technology makes it thoroughly resistant to moisture. It is an ideal option when recording in demanding environments where condensation is an issue. 

Constructed from solid brass, it is incredibly robust and lightweight. Its precise polar pattern ensures that whether used on-camera or on a boom pole, you will capture crisp, excellent-quality audio every time.

This mic has extremely low handling noise and a high level of immunity to radio frequency interference. It has a durable aluminum storage cylinder, a pop filter, mic clip and a large zip pouch.

It is designed for professional use on television, film, ENG & wherever high-resolution broadcast audio is required.


  • Directional condenser microphone with inbuilt battery
  • Convenient digital switching
  • High Frequency Boost
  • Provides 150+ hours of operation from with a charge time of only two hours.
  • Designed for professional film use television and high-resolution broadcast audio.
  • Item weight: 5.7 ounces.
  • Product dimensions: 0.86 x 0.86 x 10.94 inches.


  • Narrow pickup pattern to reduce noise.
  • 10 Year Warranty
  • Super-low Noise


  • Not effective with low-mid ranges.


ZOOM SSH-6 - mics for camcorders

Moving on to the end of the list comes the Zoom SSH-6 mic which is built to work with the Zoom’s H5 and H6 audio recorders, the hybrid Q8 audio and video recorder and the U-44 to create the best mics for camcorders.

The capsule comes with a super-directional microphone for detecting audio in the center. It can be combined with a bidirectional side microphone for detecting audio from both sides to record a mono-compatible stereo image for video, film and television projects.

You can record dialogue with the help of the center microphone and then mix the desired amount of environmental sound that is captured by the side microphone with the zoom recorder. A hairy windscreen is provided for helping reduce wind noise.


  • Compatible with Zoom H5 and H6 along with the Q8 Video Recorder.
  • The reduction of wind noise is achieved by a hairy windscreen.
  • Stereo adjustment is made with Mid-Side stereo format.
  • The changes after recording and mono compatibility are ensured.
  • Designed to work for the Zoom H5 and H6 audio recorders along with the hybrid Q8 audio.
  • Super-directional microphone for picking up central sound.
  • This sound can also be combined with a bidirectional side microphone.
  • This system helps to pick up audio from the left or right for a fully mono-compatible stereo image.


  • Excellent sound quality.
  • The adjustable side mics are useful for ambiance.


  • The preamps may produce a lot of hissing sounds.


RODE STEREO - mics for camcorders

The Stereo VideoMic X is a broadcast-grade stereo microphone designed for on-camera use. It utilizes an all-metal, robust construction that makes it ideal for regular professional use. It also provides high levels of resistance to RF interference.

The mic comes with a matched pair of ½-inch true-condenser capsules configured in a stacked X-Y configuration. These provide a highly-immersive soundscape. The capsules are supported by the Rycote Lyre shock-mounting system, which provides isolation from vibration as well as knocks and bumps.

The digital switching feature on the rear of the mic enables the user to control the level adjustment (-10dB or +20dB), the high-pass filter (0/75/150Hz), and the high-frequency boost (+6dB @ MHz) that is designed to enhance the intelligibility of dialogues.

Professional-grade balanced outputs are provided on the side of the body, in addition to the RF shielded 3.5mm stereo output cable. Its outer dome structure offers physical protection to the sensitive capsules, while also reducing wind noise and being the best mics for camcorders.


  • Includes the SC2 TRS cable, windshield and pop shield.
  • Condensor capsules are acoustically matched.
  • Onboard shock mounting of Rycote Lyre.
  • The XLR output is balanced and professional.
  • Lightweight aluminum construction.
  • Comes with a high pass filter.
  • 9V with Phantom Power P48 mini XLR.
  • Equipped with a high-frequency boost.
  • 10-year extended warranty.
  • Works on the acoustic principle of the pressure gradient.
  • JFET impedance converter is used for active electronics.
  • Cardioid Polar Pattern.
  • Frequency range: 40Hz - 20kHz.
  • Output impedance: 200Ω.
  • Maximum SPL: 143dB SPL.
  • Sensitivity: -32.0dB re 1 V/Pa.
  • Equivalent noise level: 12dB-A.
  • Power requirement: 9V alkaline battery.


  • Premium studio-grade cartridges are used for working in the field and live recording.
  • The long battery life of 48-volt phantom power.
  • Very flexible and sturdily built.


  • Expensive.


RODE VIDEOMICPRO - mics for camcorders

The RODE VideoMicPro is a compact, directional, on-camera microphone with Rycote Lyre shock mount. It is engineered for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio and perfect for mics for camcorders list.

The mic is battery powered and provides over 70 hours of recording from a single 9V battery. It comes with power, filter, and level controls that are easily accessible on the rear face of the microphone.

In addition to the microphone’s 40Hz-20kHz response, a selectable high-pass filter at 80Hz is available, which will prevent low-end noise.

The -10dB level attenuation (PAD) is perfect for recording loud sound sources, such as motorsport, live music, or in interviews, where the subject is very close to the camera.

The +20dB level boost is engineered for use with DSLR cameras. It allows the user to reduce the camera’s preamp level (or mic-input level). This effectively reduces the amount of noise generated by the camera’s comparatively low quality audio circuitry.


  • Shotgun microphone specially designed for DSLR cameras, camcorders, portable audio recorders.
  • Broadcast-quality audio provided by the ½-inch condenser capsule.
  • Has an incredibly low self-noise of 14db.
  • Rycote Lyre based shock mounting system for giving isolation from external factors.
  • Less unwanted rumble and vibrations, but have higher sensitivity.
  • The compact form factor of 150mm and 6-inch length.
  • Integrated shock mounting system.
  • Integrated foam windscreen system.
  • Has a camera shoe mount with a 3/8-inch thread that facilitates easy boom pole mounting.
  • Lightweight and weighs 85g.
  • 9V battery powered with over 70 hours of usage capacity.
  • Two-step high pass filter.


  • Self-powered condenser microphone.
  • Tighter pickup pattern.
  • Excellent shock mount system. 


  • Bulky and not easy to carry.


RODE VIDEO MIC - mics for camcorders

The VideoMic NTG is a feature-packed, broadcast-grade shotgun mic that is optimized for on-camera use and great pick for best mics for camcorders. The mic delivers unparalleled transparency and a natural, uncolored sound. It features an incredibly flat response and very low internal noise.

It is very flexible and features an array of tools and features to help you take on any recording situation. The digital switching feature gives you access to a high-pass filter, -20dB pad, high-frequency boost, and safety channel. Also, there is a unique, infinitely-variable gain control to precisely tailor the output as you need.

Its auto-sensing 3.5mm output detects the device that you are connected to and switches to accommodate. It also comes with a handy new dB peak warning light, so you can ensure your audio is not clipping.

It can pair perfectly with DSLRs, smartphones and compact cameras. Also, it is a fully-featured USB mic that can be plugged into a computer, tablet or smartphone. The 3.5mm output acts as a headphone output for non-stop monitoring of the audio.


  • Excellent acoustic design along with the natural and uncolored sound.
  • Designed for flat frequency response.
  • Highly directional super-cardioid polar pattern.
  • Has very low self-noise.
  • The high-pass filter provides digital switching.
  • 20dB pad with a high-frequency boost.
  • Safety channel and unique infinitely variable gain control.
  • Auto-sensing 3.5mm output for detecting high-quality sound.
  • Frequency range: 20Hz – 20kHz.
  • The battery life of 30+ hours.
  • Output connection: 3.5mm auto-sensing USB-C.
  • Bit depth: 24-bit.
  • Sample rates: 48kHz.
  • OS requirements: Mac OS 10.12 or Windows 10.
  • Item weight: 3.32 ounces.
  • Product dimensions: 10 x 4 x 3 inches.


  • Extremely lightweight.
  • Delivers crisp, clear audio.


  • There are pairing problems with the Wireless Go system.



If you are looking for mics for camcorders especially for professional presentations, then your search is over.  The Shure BLX14/CVL is an ideal entry-level wireless microphone system for small venues. It offers professional-quality sound with simple setup and an intuitive interface for performance and one of the best of best mics for camcorders list.

The unidirectional cardioid polar pattern rejects unwanted sound for superior audio quality and vocal reproduction. Also, it has single-channel, dual-channel, and rack mount receiver options available. It has a long battery life of up to 14 hours from 2 AA batteries.

The mic offers a 24 MHz tuning bandwidth and up to 12 compatible systems per frequency band (region dependent). It features an operating range of up to 300 feet.

Its one-touch QuickScan frequency selection quickly tells you the best open frequency in case of interference.


  • Includes a BLX4 wireless receiver, CVL Lavalier microphone and BLX1 bodypack transmitter.
  • It has power and battery status LED.
  • Adjustable gain control.
  • Comes with quick and easy frequency matching.
  • Operating range: 300 feet.
  • The transmitter form factors include bodypack, handheld, lavalier, head-worn, and instrument clip-on.
  • Single-channel, dual-channel, and a rack-mount receiver option available.
  • The battery life of up to 14 hours.
  • 24MHz tuning bandwidth and 12 compatible systems per frequency band.
  • One-touch quick scan frequency selection helps to locate the best open frequency quickly.
  • 1/4-inch and XLR output connectors.
  • Rugged and reliable construction.
  • Item weight: 2.75 pounds.
  • Product dimensions: 13.5 x 12 x 4 inches.


  • Very easy to operate.
  • It is excellent for outdoor work.
  • Best for professional presentations.
  • Clear audio quality.
  • Very light and unnoticeable.


  • Looks cheaply made.



Next up in my list comes the RodeLink FM wireless filmmaker kit offers everything you require to start shooting video wirelessly, including a transmitter, receiver and broadcast-grade lavalier mic and the best of best mics for camcorders list.

The receiver (RX-CAM) has an OLED display with information on battery status (receiver and transmitter), level, mute and channel selection. It can be mounted on a standard camera shoe mount, 3/8-inch thread or belt-clip. For more versatility, the shoe mount can be placed in any of the two positions.

You can fit the lightweight transmitter (TX-BELT) to a belt or any part of your clothing. It features a locking thread to ensure the microphone connection is as secure as possible. It has a discreet, internal antenna with a 100-meter range and 3.5mm TRS socket with dual mono output.

In addition, RODE’s omnidirectional Lavalier microphone is included in the kit to provide the highest possible audio reproduction quality. It picks up frequencies from 60 Hz to 18 kHz and ensures that audio will be recorded with broadcast quality.


  • It helps you produce broadcast-grade audio.
  • Continuously monitors and hops between frequencies for maintaining the strongest possible signal. 
  • Signal range: 100m.
  • Features an OLED display that gives information on battery level status, mute and channel selection.
  • It can be mounted on a standard camera shock mount.
  • Has a 3/8-inch thread or belt-clip.
  • Omnidirectional Lavalier microphone to provide the highest possible audio reproduction quality.
  • 2.4GHz digital transmission with 128-bit encryption.
  • Has a three-level gain control.
  • Item weight: 1lb.
  • Product dimensions: 5 x 2 x 3 inches.


  • 10 to 14 hours of battery life.
  • It can automatically find the strongest possible signal.
  • Cost-effective.


  • It is a bit too bulky.


SENNHEISER AVX - mics for camcorders

Looking for a mic with solid build quality? Then check out the Sennheiser AVX comes with an optimized dynamic range that guarantees a perfectly leveled sound to become the best of best mics for camcorders list. It matches perfectly with the camera’s sensitivity without having to adjust the audio level on the microphone by hand.

The AVX can be plugged directly into the XLR audio input and uses phantom power. It switches on and off automated with the camera.

The AVX works faster than our ears. Before any interferences become audible, it selects the best operating frequency and can switch to a clean channel. No matter what happens, seamless audio transmission between the microphone and the camera is guaranteed.

It operates in the license-free 1.9GHz frequency range and can be used in many countries worldwide without registration.


  • Ultra-compact AVX receiver that plugs directly into the XLR audio input.
  • P48 Phantom Power is used by the AVX switches for on and off automatically for the camera.
  • Input sensitivity in AVX is automatically set up for optimum recording levels.
  • The cable length: 5.25 feet.
  • Automatically selects operating frequencies for eliminating interference.
  • The frequency response: 20Hz - 20000Hz.
  • Plug and Play fast setup. 
  • Optimized dynamic range.
  • Direct plugging into XLR audio input.
  • AES-256 encryption.
  • DECT 1.9GHz transmission.
  • Automatic audio level control.
  • Automatic frequency management.
  • Item weight: 1.8lbs.
  • Product dimensions: 12.6 x 6.7 x 2.9 inches.


  • Solid build quality.
  • Great body packing with great antenna design.
  • The small receiver fits on the sound recorders and cameras without taking much space.
  • Replaceable Lithium-ion. 
  • There are zero audio drops and clear connections.


  • The receiver battery life is not adequate.

How to Choose Your best Mics For Camcorders?

To produce high-quality audio, you will require a decent microphone. However, before you make such an investment, you’ll need to consider specific points: -

  • Mounting: Mounting refers to the way the microphone connects to your camera. Make sure you know whether your mic can be mounted on your camera and how it connects to your camera.
  • Audio quality: It is crucial to check the audio quality of the microphone. Make sure to check its frequency range before you buy it. 
  • Output: It is also essential to know how the microphone will transmit the audio to the camera.
  • Budget: Generally microphones are not that expensive. The price ranges from $50 to $300 or more. So choose the microphone that fits your budget.
  • Microphone types: There are different types of microphones for camcorders, namely shotgun, lavalier, handheld and headsets. Each type has a different purpose. I have covered all the types in my list.   So analyze your purpose before you buy a microphone for camcorder and choose the type which suits you.


These are the ten best mics for camcorders available in the market currently. You’ll notice that I have taken care of all the essential points that I mentioned earlier. I have also provided a list of several other features of each product so that you can make an informed decision.

I hope that you have found what you were looking for. Thanks for reading through 🙂


I'm Xavier. I am a professional writer and blogger. It all started when I fell in love with my camera, which was presented to me when I was ten as a birthday gift. Since then, I wanted to become a cinematographer and also succeeded in that. So I am here researching and reviewing the filmmaking gadgets and giving out my top gadgets from the market.I hope you find my review articles interesting and helpful.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: